Smart Gasket®
Smart Gasket® easily installs between two
sanitary standard flanges using the Rubber
Fab sanitary Smart Clamp to secure
the flanges. Our clamp provides up to four
internal ports for accepting the Smart
Gasket® thermocouple samples or accessories;
i.e. ACC-T or K-199-S-Short
Temperature Probe; ACC-T or K-199A-LLong
Temperature Probe.
Choose between Rubber Fab’s
Thermocouple Gasket (above) or select the
Smart Gasket® Spore Trap (left) to securely
retain spore challenge test strips. There is
also a sampler device available that utilizes
standard luer lock fittings. Meter fluids in
your process system utilizing a peristaltic
pump or withdraw samples utilizing our luer
lock sampler and luer lock valve or syringe.
Benefits:
• Use temporarily or permanently
without custom thermowells
or expensive custom fittings
• Easy to expand to multiple
system sites
• Sanitary without a dead leg
Features:
• Safe to use
• Ease of installation
• 1, 2, 3 and 4 internal
ports available
• Sensors seal with gasket
compression
• User friendly
• Reusable
Smart Gasket® with Smart Clamp is
available in 1/2", 3/4", 1", 1-1/2", 2", 3" and 4" sizes and fits standard Tri-Clover®, Top Line®, Waukesha® and G&H® sanitary flanges. Choose between USDA, FDA grade EPDM, platinum-cured silicone, FKM and other elastomers (consult factory for larger sizes).
|
|
Spore Trap
You will never lose spore test strips in your
process system again. The Rubber Fab
Smart Gasket® with the Spore Trap is
designed to securely retain and accurately
expose spore challenge test strips for use
in steam sterilization when validating. After
each validation cycle, the spore trap, with
its securely retained test strip can easily be
removed and rechallenged.
Combined with the Smart Gasket®
Thermocouple Gasket, an accurate integration
of sterilization and spore strip is practical.
1, 2, 3 and 4 internal ports are available
when utilizing the spore strip Smart
Gasket®. All this is accomplished without
adding special fittings or weldments and is
easily installed into your sanitary systems.
Rubber Fab’s Smart Gasket® with Spore
Trap holder is available with and without a
thermocouple port.
The Biological Indicator Gasket
The great advantage of a self contained biological indicator over the traditional spore strip in glassine is the time saved when confirming spore kill. Results are easily obtained in only 24 hours (versus the 5 to 7 days required with a spore strip). The indicator procedure to confirm positive or negative results requires only two days, versus the five to seven days required with a spore strip. |
